Categories: Only for coolpad F2 8675-w00 Flash with twrp Full wip and install the rom Bug: Only support single card Mokee 5.0.2 Coolpad F2 – 8675-w00 |
↧
Mokee 5.0.2
↧
CM12
Only for coolpad F2 8675-w00
Flash with twrp
Full wip and install the rom
Bug:
Only support single card
CM12
Coolpad F2 – 8675-w00
↧
↧
MIUI V7 & TWRP MULTI
Change the recovery to TWRP unless you already have it installed
1.Copy ROM zip to external SD card
2. Turn off the phone, press and hold "vol+" and "power" buttons simultaneously to enter Recovery Menu
3. Wipe –> Advanced Wipe
4. Wipe Dalvik cache
5. Wipe System
6. Wipe Cache partition
7. Wipe Data
8. Reboot to Recovery Menu
9. Repeat steps 3 to 8 at least 4-5 times
10. Install ROM
11. Reboot to system
12. Enjoy !!!
If you update from a previous MIUI version
1. Download rom to external SD card
2. Tools –> Updater –> Press the 3 dots icon –> Select Update Package
Then the Phone will enter automatically to Recovery Menu and Update
Again TWRP is required , CWM will not work
This rom is based on the ROM from xiaomi note 3g device taken from xiaomi.gr developers
Everything seems to be working / No bugs so far
a. 2 sims
b. miui camera
c. play store
d. gps
e. notifications led etc…
v 5.8.27 include sound and sms patch
[/spoiler]
Please report any bugs you will come up against
Any feedback is welcome
↧
Coolpad Note3 (8676-01)Stock ROM
Categories: Stock ROM for the Coolpad Note 3 |
↧
MIUI v7 multilang
MIUI7 2015.12.24 multilanguage
INTRO
Its a hybrid rom made by me. The base rom was gathered from the chinese website 7to.cn and mixed with a multilanguage rom from xiaomi.eu. I tested the phone, 3g (yes, in slot 1), camera, gps, wifi and i think its pretty stable. You can set root rights with Supersu, not with Security app.
Its already including the basic Google Framework with Play Store.
FIRST TIME CLEAN INSTALL:
To install this rom you need a custom recovery. Copy the rom into your phone's sd card, and reboot into recovery. Before flashing do a wipe/factory reset, THAN select update from zip and go on.
UPDATE:
You can try it, but it wasnt tested, sorry. Possibly the Home settings will be reset, make a backup with titanium backup (miui.home app) and restore it after update.
RECENT CHANGES & SUGGESTIONS:
- "OFFICIAL" BUG in 12.24: If you have MiCloud FC during initial setup, set your lang to EN. after setup you can switch back to your lang.
- Fixed in 12.24: find location in weather app (thanks for the bug reports)
- Updater.apk Non-working function for ported roms - PLEASE DONT UPDATE YOUR SYSTEM WITH THIS! You can disable messages if its annoying you in the drawer.
Languages included in this rom:
- English (miui.com, xiaomi.eu)
- Chinese (Xiaomi, miui.com)
- Polish (Acid, miuipolska.pl)
- Slovak (ingbrzy, miuios.cz)
- Czech (kynio, miuios.cz)
- Bulgarian (MIUI.BG)
- Hungarian (vagyula, miui.hu)
- French (cpasmoi, MiFrance)
- Russian (miui.su)
- Croatian (Masva, MIUI Adria)
- Vietnamese (Belmont-Gabriel)
- Italian (miui.it)
- Greek (Xiaomi-Miui Hellas TEAM)
- Norwegian (datagutt, miuios.no)
- Dutch (cueie, mannyribo, redmaner)
- Spanish (rpperezr and spanish users)
- Turkish (Celaleddin, ekilciler)
- Brazilian-Portuguese (MIUIBrasil, miuirom.com.br)
- Portuguese (KcNirvana, Lippe35)
- Macedonian (FYROM)(thenewmaker)
- Serbian (BalcanGSM, dudjaa, petar, perga, Daconi, MASVA)
- Hebrew (Kkffiirr, Eliran0216)
- Romanian (ygorigor)
- German (muhamed89, cp82, dahool2016, and more)
- Catalan (deivids84)
BACKUP EVERYTHING! YOU HAVE BEEN WARNED!
I spent a lot of time to do this rom. If you are satisfied, support me with a few bucks via Paypal.Thanks!
↧
↧
Coolpad Shine-R106
Coolpad Shine R106
Android 5.1
Version :5.1.096.00.P0.151102.Y90_G00
Group FB's : https://www.facebook.com/groups/coolpad.vietnam/
↧
Stock rom
Categories: How to flash Step 1: Download the stock firmware Step 2: Rename it to update.zip Step 3: Flash it through the recovery |
↧
Coolpad 7232 Myanmar
Categories: Root access – yes Gapp Not Include |
↧
Coolpad Modena, AKA Sky, E501, Yulong Y76
Categories: Coolpad Modena Android 4.4 Version: 4.4.028.P0.150407.Y76 Guide - http://www.modaco.com/forums/topic/373530-guide-ygdp-tool-for-flashing-stock-42-44-roms/ |
↧
↧
Coolpad Note 3 ALL Recovery file
Categories: Please make a backup of your device before installing recovery ROOT FIRST USING FRAMROOT OR KINGROOT OR OTHER THIRD PARTY ROOTING APP How To Install ? video url added check it for instalation process Voiding your warranty is also result of rooting so do it on your own risk |
↧
AOSP ROM for Coolpad Note 3
About Rom :
Author : Md Rajaul
Rom Verion : V2
Rom Type : AOSP
Rom Size : 551 MB
Features Of Rom :
- Very smooth
- Good battery backup
- Camera Fixed (8mb but click good quality pictures)
- FM fixed (earphone as well as speaker)
- Low sound fixed.
- Xposed and gravity box fully working.
- Ecco xlauncher for better looks and themes.
- SMS fixed (now no sms issue).
- Pre-rooted(If you install the ROM through Philz recovery)
- Better Responsiveness & Speed
- Fast browser
- Fixed distorted bootanimation
- Fixed distorted battery animation during Charge
- Fixed google play games download error and many more.
How to Install:
Use Philz recovery as it is slow but do works more accurately than other recoveries. In case of TWRP recovery use, you will have to flash superSU again to root it but no need in case of philz.
1.Reboot to recovery(Switch off phone and press power+Volume up button till recovery menu appears)
2.Take backup of your current ROM(Go to Backup and Restore,then select backup to /sdcard or backup to /storage/sdcard1)
3.Factory Reset(Go to wipe and format option and select factory reset,then yes-wipe all user data)
4.Wipe cache(Select Wipe Cache,then yes-wipe cache)
5.Wipe Dalvik Cache(Select wipe dalvik/art cache,then yes-wipe dalvik cache)
6.Wipe for new ROM install(Select Clean to Install a New ROM,then yes-wipe user data & system data)
7.Install ROM(Go back and select Install Zip,then select downloaded ROM zip file and install)
8.Reboot.
for video guide on ROM installation
Gapps:
After flashing ROM,reboot your phone,then reboot to recovery and flash this through recovery. Click Here to Download Gapps
Note:After Gapps flash first update Play store and other google apps.
After installation of Gapps through recovery,phone will be in boot logo and boot animation for 1-3 minutes,so keep patience.
Bugs: Fingerprint and smart gestures not working.
↧
F1 MIUI V7.2.1 STABILE
If you liked this project, you can donate
Hello
This is port based on Redmi Note wcdma multilanguage
Last stabile version of xiaomi.eu V7.2.1
instruction of installation:
-Install TWRP recovery
-restart to recovery
-wipe data ….cache….dalvik
-Install "Miui_Coolpad_F1_Multilang_Stabile_V7.2.1.0.KHDCNDA_v7-4.4.zip"
-rebot phone
first start may take a long time
OK you have miui
———————–
if you have low sound
install patch "Audio Patch.zip" in recovery
should be better
———————–
For root install "UPDATE-SuperSU-v2.46.zip"
——————-
If you dont like orignal player on notification bar
install root explorer and delete statusbar_music.maml
from data/data/com.android.systemui/files/
Language included in MIUIv7:
- English (miui.com, xiaomi.eu)
- Chinese (Xiaomi, miui.com)
- Polish (Acid, miuipolska.pl)
- Slovak (ingbrzy, miuios.cz)
- Czech (kynio, miuios.cz)
- Bulgarian (MIUI.BG)
- Hungarian (vagyula, miui.hu)
- French (cpasmoi, MiFrance)
- Russian (miui.su)
- Croatian (Masva, MIUI Adria)
- Vietnamese (Belmont-Gabriel)
- Italian (miui.it)
- Greek (Xiaomi-Miui Hellas TEAM)
- Norwegian (datagutt, miuios.no)
- Dutch (jacketti, cueie, redmaner)
- Spanish (rpperezr and spanish users)
- Turkish (Celaleddin, ekilciler)
- Brazilian-Portuguese (MIUIBrasil, miuirom.com.br)
- Portuguese (Efex, x1704e, KcNirvana)
- Macedonian (FYROM)(thenewmaker)
- Serbian (BalcanGSM, dudjaa, petar, perga, Daconi, MASVA)
- Hebrew (Kkffiirr, Eliran0216)
- Romanian (ygorigor)
- German (muhamed89, cp82, dahool2016, and more)
- Catalan (deivids84)
————————-
If you liked this project, you can donate
↧
Flyme Os for COOLPAD Sky E501
Categories: This is a smooth ROM for your Device. Have Double tap. All function of Flyme OS Only Install it with TWRP. - Wipe Factory Reset with TWRP - Choose Zip File and Install - Wipe Dalvik cache and Reboot. ————————————————————— Language only China and EN ———————- We were hard working for it so if [...] |
↧
↧
Custom Recovery TWRP 3.0 for COOLPAD Sky Mini E560
Categories: This is a Stable custom Recovery for COOLPAD Sky mini E560 You can use it for backup, restore, Install patch, install custom ROM…. Wipe very fast, stable, beauty. —————————————————– How to install: - You must root your Device - Install Rashr Tool (CHplay) and use this app to flash this recovery |
↧
Yun Os for COOLPAD SKY E501
This is very very Smoot ROM, stable, and more function.
Beauty with more theme online Free. No Gapps Include, Only China and EN language
——————————————————————————————-
Installation steps:
1 – Copy the downloaded ROM to the SD memory phone.
2 – Wipes do all the TWRP recovery 2.8.7
Wipe data
Wipe system
Wipe cache
Wipe Dalvik cache
————————
↧
coolpad 8079 firmware stock and and update tool
Categories: MAKE SURE THE BATERY IS CHARGED INSTALL AND UNZIP THE FILE MAKE SURE THE DRIVERS ARE INSTALED . press and hold volumen down button and connect the device wait for the drivers to dowload run the update tool 1)select the file: (8079_4.0.065.P1.140829.8079tw.pac) as shown in the pic 2)click on start and wait fot it finish as shown in [...] |
↧
Coolpad Note 3 VIBE UI 3.0 Custom Rom
How To Root Coolpad Note 3 & Install Custom Recovery
Coolpad Note 3 is one of the best budget smartphone for Indian users with so many features and fingerprint scanner too. Well most of us bought it on flash sale from Amazon.in and have been using it without any complaint, but yes we do need a rooted device to explore the most of it. So in this article we will learn how to root coolpad note 3 and install custom recovery like Philz Recovery/TWRP. You can even root your Coolpad Note 3 without the help of any pc/laptop and can use the simple Kingroot application and Flashify to install custom recovery.
DISCLAIMER : Rooting or Flashing Custom Recoveries/Roms can brick your device. We at Techolite do not take any kind of responsibilities if your phone doesn’t boots up or your SD card is dead. It is your sole responsibility to root or flash custom roms and recoveries and bear the loss if incurred in the process.
How To Root Coolpad Note 3 Without PC
Pre-Requisites:
Rooting Without PC
- Copy the apk if you have downloaded on your pc to your Coolpad Note 3
- If you have downloaded it on your phone then just install it
- Now open the Kingroot Application
- Click the root button and wait for a moment
- You should get the success message of root within 1-2 minutes
- Reboot your device once
To check if your Coolpad Note 3 is rooted, download root checker application from Google playstore and check it.
How To Root Coolpad Note 3 With PC/Laptop
Pre-Requisites:
- SP_Driver_V2.0 and driver_setup_150313
- SP Flashtool
- Recovery – Philz Recovery/TWRP/CWM (Any one)
- MT6753_Android_scatter.txt
- SuperSU_v2.49.zip
Installing Custom Recovery Using PC/Laptop
- Extract SP_Driver_V2.0 and driver_setup_150313 on your pc and install them and then reboot your pc/laptop
- Extract SP Flashtool on your Desktop
- Now on your Coolpad Note 3 goto Settings > About Phone and then continuously tap on Build Number until you get a message “Developer Mode Enabled”
- Go back and then you will see Developer Options under Settings and tick the USB Debugging
- Copy the SuperSu_v2.49.zip on your SD card of your Phone
- Now open the SP Flashtool folder and paste the recovery.img & MT6753_Android_scatter.txt
- In the SP Flashtool folder right click on flash_tool.exe and run as administrator
- When the SP Flash tool window opens > Click on scatter loading and select MT6753_Android_scatter.txt
- Click on Download from the top
- Now switch off your Coolpad Note 3 and then connect it to your pc/laptop using USB cable and press the Volume Up button two times. This should flash the custom recovery on your device and give a successful message on the SP Flash Tool Window
Rooting Using Custom Recovery
- While you have disconnected your device from the pc and kept it switched off press Volume up and Down button together for few seconds until you see the “recovery menu“
- Now select install
- Select external sd and then select SuperSu_v2.49.zip
- Reboot your device
- Now check if your device is rooted by installing root checker application from Google playstore
Coolpad Note 3 VIBE UI 3.0 Custom Rom
One more custom rom for Coolpad Note 3 after Cyanogenmod 12.1 and this time we have all the stock features of Vibe UI which is the operating system of Lenovo smartphones. The VIBE Ui 3.0 Custom rom for Coolpad Note 3 is ported from Lenovo Vibe P1m with major features working like WiFi, Bluetooth, Calls etc. You can download the VIBE UI 3.0 custom rom and flash using TWRP custom recovery.
DISCLAIMER : Rooting & Flashing is not a easy job, it requires ample knowledge and dedication. Techolite & its authors will be in no mean responsible for any loss. May it be your phone bricks or your SD card doesn’t work anymore, you are responsible for the act and all. Good Luck!
Coolpad Note 3 VIBE UI 3.0 Custom Rom
Pre-Requisites
- Custom Recovery – Read the guide from here to install the custom recovery
- Custom Rom
- Take a backup of your personal data and contacts
- Keep the device charged above 70%
About The Rom
Type : VIBE UI
Author/Credits : Tapan Shah
Rom Version : 3.0
Android Version : 5.1
Size : 775 MB
Features Of The Rom
- Pre-rooted (SuperSu installed)
- Heads bar notifiction
- SlimLauncher
- GPS working
- FM radio working
- Root privileges under developer option
- Themes
- Quick Response
- Desk Clock
- Calculator (Scientific)
- FM
- Live Wallpapers
- Terminal
How to Install Coolpad Note 3 VIBE UI 3.0 Custom Rom
Step 1 : Copy the CN3_VIBE_UI_3_0_TECHOLITE.COM.zip file on your SD Card
Step 2 : Now go to TWRP recovery menu
Step 3 : Now Advance wipe & select system, data, dalvik cache, cache.
Step 4 : Go back and click Install and select CN3_VIBE_UI_3_0_TECHOLITE.COM.zip and flash
Step 5 : Reboot (first boot may take 5-8 minutes to reach the homescreen)
Screenshots
![coolpad note 3 custom rom]()
![coolpad note 3 custom rom]()
More Screenshots (Click to start slideshow)
Bugs
- Camera
- Storage
Video
Boot Screen Animation
- Visit this page http://www.techolite.com/?attachment_id=35812
Steps to enter Recovery mode in Coolpad Note 3
- Press and hold the Volume Up Button + Power Button.
- When you see the Bootloader Screen, Release the Power Button + Volume Buttons pressed until you see the Recovery Screen.
↧
↧
360 OS COOLPAD NOTE 3 LITE
Features:
1.360 OS is designed for security,performance and battery life.
2.360 OS optimizes your device according to usage. If you are playing a game, all the other apps and games running in the background will be withdrawn and allows you more space required for the game. In this way 360 OS provides enhanced performance.
3.ICEBOX allow you to freeze unused apps preventing them to consume system resources and data.
You can restore them anytime.
4. 360 Security is available on Play Store. Look at features of 360 total Security.
5.360 OS simply tunes the CPU according to your usage. Designed with PowerXtend Technology. 360 OS optimizes picture processing for less power consumption. Comes with super saving mode which can run 3% of power for 10 hours.
6.Inbuilt Traffic flow control
7.Inbuilt Heat tracing
8.Autorun manager
9.Authority manager
10.Working fingerprint scanner you will be surprised after using it
11.Auto call recorder
11.Auto call recorder
12.Many more……
↧
Coolpad GMS_Update Rom
OK so a long story short I reflashed my phone with an old backup only to find it did not include gapps! After several weeks of trying to download the rom via the Accessibility menu ( see pic 1) then manually trying to install google's services; I was about to bin the phone when I managed to find the original update rom from coolpad! It was thanks to Taiwan 101 Rom Factory, and google translate 
, i found the file.
Here's how to install it:
- Upload the file to the phone's internal memory, so that you can see it in the root folder( see pic 2 ).
- Goto Settings, Accessibility Menu, and choose "Install GMS package for trial"
- Click on OK when prompted to aloow the phone to reboot and install google apps ( see pic 3 )
- Enjoy having google apps on your phone. Remember to update google's apps for full functionality
↧
AOSP Marshmallow Based For Coolpad Note 3(CP8676_I02)
Presenting the AOSP marshmallow Rom For Coolpad Note 3 (CP8676_I02)
By Team Xtreme
What's working and features:
1. AOSP rom
2. Pre-Rooted
3. Xposed working and pre-installed
4. Gapps included.
5. Camera working (Back cam-8mp and Front cam-5mp, no hanging and no greenish pics)
6. Great Battery Backup
7. Butter Smooth
8. Great Gaming Performance
9. Rest you explore
Bugs:
1. Vibration for touch capatative buttons not working(patch will be given soon)
2. Back camera is 8mp, not 13mp, but gives great shots with focus.
3. Fingerprint not working.
4. Smart Gestures not working.
5. Language Changes to Sim Language(Hindi) after every reboot, need to change it from settings>Language and input?language, after every reboot.
6. Rest you find and tell us, we will try to fix it.
Installation process:
Firstly you need to be on a custom twrp recovery.
1. Download the TWRP backup rom.
2. Extract the TWRP backup rom zip to internel/extrenal>TWRP>BACKUPS>CP8676_I02.
3. Now reboot to TWRP recovery.
4. Note: Make A twrp full rom backup as backup if something wents wrong.
5. Now select "Restore" option, select "select storage" and select the the storage where you have extracted the twrp backup of ASOPmm that is either internal or external and click on OK.
6. From "Select Package to restore" list select "2016-06-14–04-59-40_AOSP_MM_By_Team_Xtreme" option
7. In "Select Partitions to restore" list, select all partitions name, and then Swipe "Swipe to restore". wait for the backup to restore.
8. Select " Reboot"
Enjoy AOSP mm…………
Note: If you face low sound issue
1. Open "Dialer" and dial *#*#3646633#*#*.
2. Now you will enter "Engineering Mode"
3. Select "Hardware Testing" tab
4. Select Audio>LoudSpeaker Mode
5. In "Max Vol.0~160" change value to 160. and click "Set"
Problem Solved……
Our team:
Mayur Poptani(Me)
Anis Mulla
Devendra Milmile
Dhana Mari
Amit Kumar
Pinto Thakur
Septian Aditiya
↧